{"title":"Development Kits","description":"\u003cp\u003e\u003cspan\u003eAPW now offers electromagnet development kits aimed at simplifying our customers design process. We want to make it as easy as possible to power and control our electromagnets. By offering our products paired with existing drivers we are removing a big hurdle in the design process for implementing electromagnets.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"dev-kit-em100-12-222","title":"Dev Kit - EM100-12-222","description":"\u003cp\u003eWe have paired our 12v, 1\" electromagnet with a coil driver from KG4 Controls to make it easy to interface with control systems. The simple 3 wire design needs only positive power, ground and a trigger signal to operate. The electromagnet project kit includes a 1\" electromagnet, coil driver, wiring harness with 12\" leads, strike plate and mounting hardware. The Product comes fully assembled, just align the driver pin 1 with the corresponding pin 1 on the wiring harness and insert the board to get started.\u003c\/p\u003e\n\n\u003cp\u003eThis kit is great for the hobbyist who wants to implement electromagnets into their projects. The trigger input for the driver accepts a wide range of signals down to 4.5 volts which makes it perfect for pairing with an Arduino project. As long as there are 12 volts being supplied to the driver and the trigger signal is being held high the magnet can stay on indefinitely. The electromagnet was designed to run at 100% duty cycle.\u003c\/p\u003e\n\n\u003cp\u003ePinout:\u003c\/p\u003e\n\n\u003cp\u003eRed = +12v\u003c\/p\u003e\n\n\u003cp\u003eBlack = Ground\u003c\/p\u003e\n\n\u003cp\u003eBlue = Trigger (+5v to +12v to activate)\u003c\/p\u003e\n\n\u003cp\u003eElectromagnet Project Kit Includes:\u003c\/p\u003e\n\n\u003cp\u003e1\" 12v Electromagnet and Mounting Screw (Length 1\"  Thread 8-32)\u003c\/p\u003e\n\n\u003cp\u003eElectromagnet Driver\u003c\/p\u003e\n\n\u003cp\u003eWiring Harness\u003c\/p\u003e\n\n\u003cp\u003eStrike Plate and Mounting Screw (Length 3\/4\"  Thread 8-32)\u003c\/p\u003e","brand":"APW Company","offers":[{"title":"Default Title","offer_id":47731105497262,"sku":"DKIT-4777","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/5431\/2878\/files\/5fffe6eb-kit-1-crop025x_1_640x512_2490a9d6-04e2-4f6b-b684-1b734a490089.png?v=1776106770"},{"product_id":"diy-electronics-project-kit-dkit100-inline-coil-driver-and-electromagnet-kit","title":"DIY Electronics Project Kit - DKIT100 Inline Coil Driver and Electromagnet Kit","description":"\u003cp\u003eWe have paired our 1\" electromagnet with our inline coil driver to make it easy to interface with control systems. The simple 3 wire design needs only power, ground and a trigger signal to operate. The electromagnet project kit includes a 1\" electromagnet, inline coil driver, strike plate and mounting hardware. The driver is clearly labeled to allow easy installation of the wires. Simply tighten the wires down with a small flat head screwdriver and start using it to drive your electromagnet. The trigger is active low and floats at 5v normally. When the trigger is connected to ground or is fed a digital LOW signal the driver will activate the electromagnet.\u003c\/p\u003e\n\n\u003cp\u003eThis kit is great for the hobbyist who wants to implement electromagnets into their projects. The driver can easily be connected with an Arduino or other microcontrollers. As long as power is being supplied to the driver and the trigger signal is being held LOW the electromagnet can stay on indefinitely. The electromagnet was designed to run at 100% duty cycle and the driver is programmed in a solid state relay configuration which means it applies full power while activated.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eElectromagnet\/Driver Kit Includes:\u003c\/p\u003e\n\n\u003cp\u003e1\" 12v Electromagnet and Mounting Screw (Length 1\"  Thread 8-32)\u003c\/p\u003e\n\n\u003cp\u003eElectromagnet Driver\u003c\/p\u003e\n\n\u003cp\u003eStrike Plate and Mounting Screw (Length 3\/4\"  Thread 8-32)\u003c\/p\u003e","brand":"APW Company","offers":[{"title":"12","offer_id":47731114115246,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"24","offer_id":47736057987246,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/5431\/2878\/files\/59f81b01-dkit100-1.png?v=1776106789"},{"product_id":"diy-electronics-project-kit-dkit150-inline-coil-driver-and-electromagnet-kit","title":"DIY Electronics Project Kit - DKIT150 Inline Coil Driver and Electromagnet Kit","description":"\u003cp\u003eWe have paired our 1.5\" electromagnet with our inline coil driver to make it easy to interface with control systems. The simple 3 wire design needs only power, ground and a trigger signal to operate. The electromagnet project kit includes a 1.5\" electromagnet, inline coil driver, strike plate and mounting hardware. The driver is clearly labeled to allow easy installation of the wires. Simply tighten the wires down with a small flat head screwdriver and start using it to drive your electromagnet. The trigger is active low and floats at 5v normally. When the trigger is connected to ground or is fed a digital LOW signal the driver will activate the electromagnet.\u003c\/p\u003e\n\n\u003cp\u003eThis kit is great for the hobbyist who wants to implement electromagnets into their projects. The driver can easily be connected with an Arduino or other microcontrollers. As long as power is being supplied to the driver and the trigger signal is being held LOW the electromagnet can stay on indefinitely. The electromagnet was designed to run at 100% duty cycle and the driver is programmed in a solid state relay configuration which means it applies full power while activated.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eElectromagnet\/Driver Kit Includes:\u003c\/p\u003e\n\n\u003cp\u003e1.5\" 12v Electromagnet and Mounting Screw (Length 1.25\"  Thread 8-32)\u003c\/p\u003e\n\n\u003cp\u003eElectromagnet Driver\u003c\/p\u003e\n\n\u003cp\u003eStrike Plate and Mounting Screw (Length 3\/4\"  Thread 8-32)\u003c\/p\u003e","brand":"APW Company","offers":[{"title":"12","offer_id":47731114279086,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"24","offer_id":47736058380462,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/5431\/2878\/files\/6022ac8a-dkit150-1.png?v=1776106789"},{"product_id":"diy-electronics-project-kit-dkit137-inline-coil-driver-and-electromagnet-kit","title":"DIY Electronics Project Kit - DKIT137 Inline Coil Driver and Electromagnet Kit","description":"\u003cp\u003eWe have paired our 1.37\" electromagnet with our inline coil driver to make it easy to interface with control systems. The simple 3 wire design needs only power, ground and a trigger signal to operate. The electromagnet project kit includes a 1.37\" electromagnet, inline coil driver, strike plate and mounting hardware. The driver is clearly labeled to allow easy installation of the wires. Simply tighten the wires down with a small flat head screwdriver and start using it to drive your electromagnet. The trigger is active low and floats at 5v normally. When the trigger is connected to ground or is fed a digital LOW signal the driver will activate the electromagnet.\u003c\/p\u003e\n\n\u003cp\u003eThis kit is great for the hobbyist who wants to implement electromagnets into their projects. The driver can easily be connected with an Arduino or other microcontrollers. As long as power is being supplied to the driver and the trigger signal is being held LOW the electromagnet can stay on indefinitely. The electromagnet was designed to run at 100% duty cycle and the driver is programmed in a solid state relay configuration which means it applies full power while activated.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eElectromagnet\/Driver Kit Includes:\u003c\/p\u003e\n\n\u003cp\u003e1.375\" 12v Electromagnet and Mounting Screw (Length .625\"  Thread 8-32)\u003c\/p\u003e\n\n\u003cp\u003eElectromagnet Driver\u003c\/p\u003e\n\n\u003cp\u003eStrike Plate and Mounting Screw (Length 3\/4\"  Thread 8-32)\u003c\/p\u003e","brand":"APW Company","offers":[{"title":"12","offer_id":47731114475694,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"24","offer_id":47736058347694,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/5431\/2878\/files\/d436b3ba-dkit137-1.png?v=1776106789"},{"product_id":"inline-logic-level-cool-solenoid-valve-driver-100-hold-high-performance-automation-control","title":"Inline Logic Level Cool Solenoid Valve Driver 100% Hold | High-Performance Automation Control","description":"\u003cp\u003eThe KG-ID-V4 Inline Driver simplifies operating coil devices, like solenoids and electromagnets, with its hit-and-hold configuration. This driver activates at full power and then drops down to a lower holding power, significantly reducing operating temperature and energy consumption. Different hit-and-hold profiles, including a solid-state relay profile, are available for various coil devices. The driver is easily activated with a logic signal, triggering the driver by connecting the trigger input to ground or sending a logic \"0\" input to the pulled-up +5v trigger input.\u003c\/p\u003e","brand":"APW Company","offers":[{"title":"Default Title","offer_id":47932706062510,"sku":"KG-ID-V4-100","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/5431\/2878\/files\/d4200f99-kg-id-v2-image-1-scaled_640x489_c09566d7-fb6f-49b7-b778-4ed042b88d21.png?v=1776106769"},{"product_id":"inline-logic-level-cool-solenoid-valve-driver-50-hold-high-performance-automation-control","title":"Inline Logic Level Cool Solenoid Valve Driver 50% Hold | High-Performance Automation Control","description":"\u003cp\u003eThe KG-ID-V4 Inline Driver simplifies operating coil devices, like solenoids and electromagnets, with its hit-and-hold configuration. This driver activates at full power and then drops down to a lower holding power, significantly reducing operating temperature and energy consumption. Different hit-and-hold profiles, including a solid-state relay profile, are available for various coil devices. The driver is easily activated with a logic signal, triggering the driver by connecting the trigger input to ground or sending a logic \"0\" input to the pulled-up +5v trigger input.\u003c\/p\u003e","brand":"APW Company","offers":[{"title":"Default Title","offer_id":47932714942638,"sku":"KG-ID-V4-50","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/5431\/2878\/files\/d4200f99-kg-id-v2-image-1-scaled_640x489_c09566d7-fb6f-49b7-b778-4ed042b88d21.png?v=1776106769"},{"product_id":"inline-logic-level-cool-solenoid-valve-driver-33-hold-high-performance-automation-control","title":"Inline Logic Level Cool Solenoid Valve Driver 33% Hold | High-Performance Automation Control","description":"\u003cp\u003eThe KG-ID-V4 Inline Driver simplifies operating coil devices, like solenoids and electromagnets, with its hit-and-hold configuration. This driver activates at full power and then drops down to a lower holding power, significantly reducing operating temperature and energy consumption. Different hit-and-hold profiles, including a solid-state relay profile, are available for various coil devices. The driver is easily activated with a logic signal, triggering the driver by connecting the trigger input to ground or sending a logic \"0\" input to the pulled-up +5v trigger input.\u003c\/p\u003e","brand":"APW Company","offers":[{"title":"Default Title","offer_id":47932717498542,"sku":"KG-ID-V4-33","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/5431\/2878\/files\/d4200f99-kg-id-v2-image-1-scaled_640x489_c09566d7-fb6f-49b7-b778-4ed042b88d21.png?v=1776106769"},{"product_id":"inline-logic-level-cool-solenoid-valve-driver-20-hold-high-performance-automation-control","title":"Inline Logic Level Cool Solenoid Valve Driver 20% Hold | High-Performance Automation Control","description":"\u003cp\u003eThe KG-ID-V4 Inline Driver simplifies operating coil devices, like solenoids and electromagnets, with its hit-and-hold configuration. This driver activates at full power and then drops down to a lower holding power, significantly reducing operating temperature and energy consumption. Different hit-and-hold profiles, including a solid-state relay profile, are available for various coil devices. The driver is easily activated with a logic signal, triggering the driver by connecting the trigger input to ground or sending a logic \"0\" input to the pulled-up +5v trigger input.\u003c\/p\u003e","brand":"APW Company","offers":[{"title":"Default Title","offer_id":47932718612654,"sku":"KG-ID-V4-20","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/5431\/2878\/files\/d4200f99-kg-id-v2-image-1-scaled_640x489_c09566d7-fb6f-49b7-b778-4ed042b88d21.png?v=1776106769"}],"url":"https:\/\/apwcompany.com\/collections\/development-kits.oembed","provider":"APW Company","version":"1.0","type":"link"}